Application Range
Separate precise SMD thin board, aluminum PCB, for special board , needs customization .
Feature:
Apply latest pneumatic design of light weight, the PCB could be separated in one time, with minimum internal stress, especially suitable to separation of precise SMD or thin board. Unlike double round blade PCB separator, there won`t be any bow wave or micro crack generated.
It uses wedge cutter to shear PCB in line, internal stress decreases to lowest point, even the sensitive SMD modules or capacitance still won`t be influenced, then potential risk on quality is minimized.
Cutter blade applies SKH-11 steel, also suitable to separate PCB without V-cut.
- Double straight blade, highly suitable to separate SMD thin board and aluminum PCB
- Guillotine type, for PCB of thickness 0.2 to 3.0mm, cutting moving distance 1 to 3mm, safe operation.
- Keep internal stress within 80-180Ue, to avoid micro crack and damage to precise components.
- Able to shear edge of V-cut, distance from the component should >=0.3mm
- Shear rate is one segmentation per second, control by foot-plate pneumatic switch
- With calculation function, obvious vision on productivity
- Shear blade group is started passively, shear line and position can be handled safely
- Shear not by rolling blade, no dust, no motor drive, no pollution of carbon dust
- Shear is not by blade friction, so there is no residue from blade
- Shear Blade warranty 6000000 times, no need electricity supply, then no consumption on electric equipment.
- Air pressure 0.4-0.6Mpa, no need to prepare specific place for the shear
- Could configure moveable working shelf, can move and operate conveniently.
Technique Parameter
| Model |
ML-620 |
| Machine Dimension |
680×250×450mm |
| Machine Weight |
138KG |
| Moveable Shelf Size |
720×755×420mm |
| Working Voltage |
220V |
| Working Pressure |
0.4-0.6Mpa |
| Power |
16.8W |
| Shear Length |
0-330mm |
| Shear Width |
0-unlimited |
| Shear Thickness |
0.2-3.0mm |
| Shear Speed |
One segmentation per second |
| Blade Size |
356×45×6mm |
| Height of component |
<=15mm,when component is on upper side
<=19mm, when component is on back |
| Distance between component and V-cut |
>=3mm |
Mobile:+86-16675158845
Tel:+86-755-21635007 Web: http://qysmt12.en.made-in-china.com
Add:Room 1107, Tongfang Centre, Zhongxin Road,Shajing,Baoan,Shenzhen, China 518104
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}